Martel T-140 Pressure Calibrator

Harga :
CALL
Merk :
Martel
Pengiriman :
3 hari sejak pembayaran
Lokasi :
Dilihat :
221 Kali
Update Terakhir :
01-12-2014 16:58

Detail Produk

 The Martel T-140 Pressure Calibrator is available in several ranges; 10″ H2O, 200″ H2O, and 30, 100, 300, and 3,000 psi. Operation of this calibrator is made easy through the use of a sealed membrane keypad with simple controls. When combined with a Martel MECP100, MECP500, or MECP10K pump, the T-140 kit makes a great package to handle your pneumatic or hydraulic calibration requirements.

Features:
  • High accuracy gauge and differential capability
  • Rugged, dust tight, water-resistant case
  • Isolated SS sensors on 300 psi and 3,000 psi units
  • Easy to read super-twist LCD
  • Intuitive controls male operation easy, even for infrequent users
  • Powered by a common 9 volt alkaline battery
  • Supplied in a neoprene sleeve; optional carrying case available
Specifications (18 °C to 28 °C unless otherwise noted)
Accuracy
  ± 10" H2O ±0.1% FS
All other ranges ±0.05% FS
Resolution    
  ± 10" H2O...0.001" H2O
± 200" H2O...0.01" H2O
30 PSI ...0.001 PSI
100 PSI ...0.01 PSI
300 PSI ...0.01 PSI
3000 PSI ...0.1 PSI
 
Temperature Stability
  ±0.01% FS per °C;
0°C to 18°C, and 28°C to 50°C
Maximum Overpressure    
  Ranges >= 100 PSI 2X
Ranges <= 30 PSI 3X
 
Standard Engineering Units
  PSI, Bar, inH2O, cmH2O
  mH2O, ft H2O, mBAR
  inHg, mmHg, cmHg, kg/cm2, TORR, ATM, KPa
Media Compatibility
  10" inH2O, 200" inH2O, 30 psi, 100 psi ... Clean Dry Air or Gas Only  
  300 psi, 3000 psi ... All media compatible with 316SS
Environmental
  Operating Temperature -10 °C to +55 °C
  Storage -20 °C to +70 °C (-4 °F to +158 °F)
Mechanical
  Dimensions 5.7" H x 3.5"W x 1.43"D
  Input Port(s) 1/8" female NPT
Power
  Battery one 9V alkaline battery

Permintaan Penawaran