- CAL CHECK™
- User calibration
- Certified calibration and verification standards
- BEPS (Battery Error Prevention System)
- TIMER function
- Auto shut-off
- GLP Features
Chlorine is the most common water disinfectant used in many swimming pools and spas.
In swimming pools, spas and similar applications, Cyanuric Acid helps to stabilize the breakdown of chlorine, especially in sunlight. Frequent testing of both cyanuric acid and pH will help to minimize chlorine consumption.
Specifically designed for swimming pool and spa applications, the HI 96104 measures
pH, Free and Total Chlorine and Cyanuric Acid content.
The HI 96104 meter measures pH, Free and Total Chlorine and Cyanuric Acid content in water and wastewater. The reagents are in powder and liquid form depending on the parameter and they are supplied in dropper bottles and packets.
Spesification :
| Range | pH | 6.5 to 8.5 pH |
| Cl, Free | 0.00 to 5.00 mg/L (ppm) | |
| Cl, Total | 0.00 to 5.00 mg/L (ppm) | |
| CYA | 0 to 80 mg/L (ppm) | |
| Resolution | pH | 0.1 pH |
| Cl, Free | 0.01 mg/L | |
| Cl, Total | 0.01 mg/L | |
| CYA | 1 mg/L (ppm) | |
| Accuracy @25°C | pH | ±0.1 pH |
| Cl, Free | ±0.03 mg/L ±3% of reading | |
| Cl, Total | ±0.03 mg/L ±3% of reading | |
| CYA | ±1 mg/L ±15% of reading | |
| Light Source | tungsten lamp | |
| Light Detector | silicon photocell with narrow band interference filter @ 525 nm | |
| Power Supply | 9V battery | |
| Auto-off | after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder | |
| Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | |
| Dimensions | 192 x 104 x 69 mm (7.6 x 4.1 x 2.7") | |
| Weight | 360 g (12.7 oz.) | |
| Method | pH | Phenol Red method |
| Chlorine | adaptation of the EPA recommended DPD method 330.5 | |
| CYA | adaptation of the Turbidimetric method |
